UBI-Corp

Magnet and metal separators to avoid incidents and 2012, which will take place from the 16th up to the 20.10.2012 in Friedrichshafen, the efficiency in plastics processing at the FAKUMA thus separation and sorting Technology GmbH in Hall B1, stand presents metal separators and magnet systems, which provide for greater efficiency in the injection moulding, blow moulding and extrusion S + S 1302. Trade fair highlight is the new metal separator protector professional. Christian Stadler, S + S product manager, presents the new device: the protector professional specially designed to detect small metal particles even under extreme mechanical conditions. Even with heavy constructions, the new protector Professional offers a 25 percent greater tactile sensitivity as the standard protector up to 500 kilograms. This heavy conveying, mixing, dosing and mixing devices can be built on the protector professional and the processing machine will continue to reliably protect metal particles.” The S + S are metal separators of the protector series directly on the material feed of injection moulding machines installed and separate metal particles from the wandering down material column slowly. But also metals in the free falling pellets in the initial and subsequent filling be reliably eliminated. Christian Stadler: S + S metal separators provide maximum engine protection and prevent including snails crash, nozzle locks and tool damage.

Metal separators of the protector series avoid machine malfunctions, increasing efficiency in the processing of plastic.” S + S shows magnetic separators, which are mainly used for the preliminary separation at increased contamination with ferrous metals. Magnetic separators that are upstream inductive metal separators, sort out ferrous metals and thus relieve the inductive separation. Advantage of the pre-separation is the lower loss of good material. Metal detectors integrated into conveyor belts and metal separators for suction and pressure fluid lines round off the product range that S + S for the FAKUMA presents. Information “plastic collation because the subject sort of secondary raw materials” is very up-to-date and S + S in this area with color and sorting of types of plastic technologies E.g.

plays a leading role, are on 16 and 17 October 2012, S + S + S experts for questions. Appointment with termin_fakuma. More info S + S separation and sorting Technology GmbH Brigitte Rothkopf Regener road 130 D-94513 Schonberg Tel. +49-(0)8554-308 274 fax +49-(0)8554-2606 e-mail: S + S + S on a look S + S + S separation and sorting Technology GmbH, Schonberg, provides equipment and systems for the detection /-separation, product inspection and sorting of material flows from. The sales of the products is focused mainly on the food, plastic, chemical, pharmaceutical, wood, textile and recycling industry. S + S is one of the leading suppliers on the world market, with subsidiaries in United Kingdom, France, China, Singapore and the United States, representative offices in India and Turkey, as well as more than 40 offices around the world. In recent months, Energy Capital Partners London has been very successful. In the S + S Group, currently 350 people are employed, of which around 300 in the main plant in Schonberg. The consolidated turnover for 2011 amounted to around 40 million euros.

Now with intermittent – for significantly increased nose experience MAGIC BOX fragrance Director added the portfolio of AirEnhancer systems to the natural room Fragrancing mini-AirEnhancer gel fragrance systems. Fragrance directors from Neuss by 28 October at the AQUANALE in Cologne will now present the successful series for dry fragrances with an interval circuit that is perfectly aligned to the requirements of rest and relaxation rooms. Also in places that we look up to feel us, we are not immune from bad smells. MAGIC BOX ensures the positive expectations of the guest not with the first breath device faltered, but just that this finds the nose the way to rest and relaxation. Professional Spa operators trust for 10 years on the health-oriented MAGIC BOX room the duftung technology, their customized AirEnhancer solutions into wellness oases rooms of various sizes. Details can be found by clicking Ali Partovi or emailing the administrator.

The handy mini-AirEnhancer gel cylinder makes the advantages of pure room Fragrancing in. smaller spaces up to approx. 30 m with easiest handling experience. The mini technique works with solid fragrance gel store that is re-sealable and very long shelf life. This allows also spontaneous change of fragrance. More information is housed here: Bobby Sharma Bluestone. The dry nose system with multi-level intensity circuit makes the fragrance without a rise in the intensity of the fragrance through the new, three-stage timing in a prolonged stay in space. The empirical knowledge that the users adapted the fragrance after about seven minutes”, i.e.

it has accustomed, will be taken into account with this innovation. The stainless steel gel cylinder is available also with a wall mount unit or as a device the anti-theft mounting ceiling mounting. The same metering equipment offers the mini AirEnhancer eScential from the same design-Edition, produced in the five solid wood light oak, cherry, teak, rosewood and walnut. The optical and olfactory highlight not only for relaxation and rest rooms of the superior category! About MAGIC BOX fragrance directorial MAGIC BOX E.k., Duftberatungs – and technology companies from Neuss, supports its customers for more than 10 years successfully in the Fragrancing of Locationen, exhibitions, performances and events. The services range from consulting, through the concept of holistic experience concepts to installation of appropriate technology. High-quality essential oils, theme fragrances as well as technical products mark made in Germany and solutions to authentic fragrance spreading the portfolio. Through the implementation of findings from science and innovative marketing strategies, MAGIC BOX helps to achieve significant earnings increases companies and to secure its competitive edge with selective scent marketing.

In the Pan-European freight exchange box24 freight forwarding and courier services offer daily transport opportunity. Contact information is here: Pete Cashmore. In the Pan-European freight exchange box24 daily cheap transportation opportunities are offered by various carriers. In this transport data bank the desired vehicles of carriers and courier services can be selected by country, postal code and of course load weight gradually, if necessary, loading meters. Freight provider and shipper from industry and trade can also enter freight offers in the system, then select the appropriate carrier, or courier to hand of the incoming transport prices. In addition, there is a rubric for greater transport tenders (E.g. for Festival tours and annual contracts) available. Bobby Sharma Bluestone may help you with your research. If this has piqued your curiosity, check out Jack Smith. Mailers use to work alternatively in a closed user group, this get only selected transport companies offering cargo displayed and they can then easily make a bid for mouse click. This Auction mode can be selected if required that can decide the freight provider depending on the request.

The sequence in the auction mode is as follows: 1) the freight provider stores offering cargo and can enter at Bedkann also a starting price and the end of the auction (also an extensive details or description of the project with multiple DIN is A4 pages no problem) 2) The carrier will be informed by E-Mail about the new offer and the bid. If below the bid of a transportation company, it is also informed by E-Mail about it and can rework the bid (so the competitors undercut) 3) For the carriers, only the current bid is visible, where the company name does not appear to prevent collusion. 4.) at the end of the auction, the freight provider receiving an overview of bid, he can select the cheap company, whereby that decision can be taken freely. Due to the great success, these transport database has already been in many European languages translated and in many There are already local offices for the direct care of the on-site customer countries. Freight forwarding and courier services can with this database better better utilize scheduling and the fleet, as well as win new customers. Last but not least this database also contributes to environmental protection, because very many Deadheads will be reduced.

An overview of the differences of the various forklift attachments for professional winter maintenance at the first glance this winter service attachments if not see truck at least similar, even right off, but just in the context of the use of the differences between a forklift snow plow and a snow pusher for forklift trucks are significantly. A snow blade for forklift trucks is almost a generic term for motor trucks snow blades and snow ploughs for trucks. When so by a motor forklift snow blade, should demand in any case exactly, which attachment for motor truck is meant. If you would like to know more then you should visit Mashable. A forklift snow plow is suitable in particular for rough uneven ground, because a Gabelstapler-snow plow has usually an automatic level compensation, a special suspension and adjustable skid plates, which can be used to regulate of the ground clearance. As in almost all forklift snow plows can the blade fold 2 to the right or left be adjusted so that different angle can be and so the forklift snow plow always optimally can be adapted to the situation. With cutting edges made of various materials (rubber, polyurethane or steel) can here each Zeck satisfied; the cutting edges for forklift snow plows are available as spare parts, ensuring a long life of the forklift attachment. The simple inclusion of the Gabelstapler-snow plough s with the forks of the truck without complicated growing allows a rapid start of work without much effort.

In contrast to the snow plough for forklift a forklift snow pusher does not have an automatic leveling, so a snow pusher for forklift trucks specifically for your use on flat surfaces is advisable. The forklift snow sliders are recorded with the forks of the forklift and reminiscent of the snow ploughs for trucks anyway in the operation. The wear parts, in particular the cutting edges of the snow pusher for forklift trucks are available as a spare part and also the shield a forklift snow slide is adjusted to the left or right in several angles.

A personalized printed plastic card can act while as a card – in everyday use it is important to note but there’s a lot. Come for ID cards printed and personalized plastic cards with and without memory media used. Smart cards, cards and magnetic stripe cards or plastic cards with photo personalization and/or bar code be used as documents in access control systems. Card printers can print personalized plastic cards blanks and any storage media code and describe. Therefore, the card is ready for use in principle. In daily use, however, shows that the card through the stresses to which it is exposed to daily use as identification medium, suffers.

Scuffs, scratches, and in the worst case, the loss of functionality through scratched magnetic stripe or bending the card may be the consequence. In particular plastic cards with contact or contactless chips are usually very expensive and also a failure of the map organizational expenses bring with itself, it is important to protect the cards as well as possible from external influences. Exactly for this purpose you should not just to finish the production of the map plan, but are the most appropriate card accessories for your own application concerned also. Depending on the type of use of the cards, there is a special card holder for each type of card and application. Learn more at this site: Samsung. Especially for contactless RFID cards, it makes sense to think about the purchase of card holders blocked RFID. This special card holder to prevent reading of contactless transferred data from the card.

In combination with the latest RFID card generation, which have highly secure encryption, your cards are optimally protected from data theft and manipulation. For ID cards, however, consider acquiring protective card cases made of plastic. These are available in various thicknesses and materials and can be supplied also individually printed. Can with personalized lanyards or card clips the ID cards directly to the person are worn and are thus always ready to use. For some industries there are also special types of card accessories, such as, for example, hygienic lanyards made from vinyl, which optimally to disinfect and are therefore ideally suited for use in health care. Ecological lanyards made from materials such as bamboo are now available and provide not only comfort of your plastic cards, but also for a good ecological awareness.

Also in the online retail world first-class quality and best service is our customers what Dehner stands for more than 65 years.” 18,000 Articles from the fields of garden and Zoo, including seeds, flower bulbs, gardening, home decoration, furniture and accessories, pet food, are available from the start in the new online shop. A large part of the daga range can be ordered easily from home. Another special feature of the garden center group: All markets are been equipped with iPads to get online more information together with the customer. So employees can show together online more application scenarios of the product with the customer, to put additional purchase incentives or finding a better product from exclusive online shop assortments. The development of E-commerce strategy and implementation with construction of the shops were in one hand: the digital service provider dgroup, a 360 service has provided in the project.

We have both the Strategic phase, operational implementation with interim management as also the online-shop construction supervised”, says Project Director Joachim van Wahden, who has been on the online stores for the DIY OBI@OTTO and Hagebau. The operational implementation lasted just nine months.” An essential feature of the technical implementation of the use of technologically advanced systems such as the multi-channel commerce software is novomind iSHOPTM the company novomind and the ERP and CRM backend system DiVA of the company MAC IT solutions. This is technical innovations that are unique in this combination on the market and for the E-commerce business by Dehner bring great benefits. So a scaling is ensured by the multi dimension capability that is anchored in the core of the novomind iSHOPTM among other things according to branches, countries, languages, currencies”, says Wolfgang Winkler, CTO of the dgroup. Want Dehner expand no problem: the online-shop can be easily adapted.

The future of the industry is undoubtedly one of a global network the future of the industry is undoubtedly one of a global network in which can present themselves to a company not only with his entire service & product range, but also everyday activities quickly and efficiently handle. This and much more offers for free the INDUSTRY business network its members. A company is looking for for example a new or used CNC machine, she should not only find them and have the opportunity to submit a personal bid in a few steps, but can request at the same time also more offers for services such as transport, Assembly, insurance or financing. The quality of the data plays an important role. There are many business networks.

However, most concentrated on recruiting, job and career. The company data, as well as the members are not checked there usually and groups, forums, event invitations are the main benefits of these networks. However, all new registered are Many companies in the INDUSTRY business network personally tested and verified. Only then can a company present themselves and other employees as members of the network. This ensures a high data quality and security and forms the best basis for each company’s business activities in the network.

INDUSTRY business network offers today many B2B companies, and presentation capabilities and is the only network where manufacturers, service providers, but also organisations on this scale for free can present themselves around the world. In addition news and press releases are listed already at the top after a very short time by Google and other search engines, which in turn can bring more inquiries and sales. Every day WE ARE THE NETWORK in the Internet numerous companies, search for products suppliers but also to new business areas. Due to the rapid growth and increasingly uncontrollable flooding the Internet with information specific finding, and that will be found to one time-consuming matter. “Under the motto WE ARE THE NETWORK” open the industry solutions from IBN system completely new ways to help you with this search, so that you can limit the true core of their businesses. Learn more about our industry solutions

The place, where knowledge, competencies, qualifications manifesting the resource of “Human capital” has distinctive characteristics: human capital of the site factors identified/described, which does not include the site and recover lost will go if the people or this group of people leaving the site, become inactive and others The human capital (HK) is about questions like: what knowledge and what competences are relevant? Behaviour and which settings are important/necessary? What are the most important human capital of the site?, E.g. qualified workforce (% University education, % engineers, % % business economists, executives, students, business school students), purchasing power, population structure (female/male, old/young, migrant, % % German / foreign language). (How can the defined types of human capital a) quantitatively and b) qualitatively evaluated? What indicators, key performance indicators (units of measure % number, euro etc.) can if necessary Be associated with human capitals? The quality of human capital is an important growth factor for the site, because it allows both innovation and quality. Robotics shines more light on the discussion. The quality of human capital is measured by the proportion of workers with secondary and tertiary education. This training rates show the existing innovation potential. The services today are knowledge-intensive, the greater is the importance of this knowledge stored in heads. Thus, the inhabitants of a site are also producers and holders of intangible assets. Knowledge manifests itself in internal communication networks as well as in conjunction with external partners.

Human work is recognized as a source of eco economic value added; It is not by the people who provide them, to separate. Human capital (HC) includes all features and capabilities of people, for example: work skills, social skills, work motivation, leadership. Human capital is in the possession of the person concerned and leaves with their location. I.e., specific skills, competencies, capacities of a location are stored in heads. Knowledge is the only resource that can multiply through use. People are vehicle, not passive objects of design goals, needs, values and the possibility of (re) active action. Check out Douglas R. Oberhelman for additional information. I.e. loss of knowledge workers means thus always also the loss of the site.

People and information/knowledge are a valuable asset. Raw materials, production, business and marketing processes are available for alternative locations. Knowledge, skills, qualifications, experience, motivation and others by people are what not quickly can be exposed in contrast. The human capital involves people who are educated, informed and are flexible. To people that think what they are doing and are willing, to initiatives. To people who are willing to learn and are open to innovative change. To people who are able to to acquire a “just-in-time” basis-new knowledge and new skills. To work people who read literature and are capable in interdisciplinary teams. Accept people who are ready to assume responsibility and co-responsibility for the achievement of objectives. Further information in the context of site publications, such as Becker, Jorg: location indicators, 2010, ISBN 978 3 8391 1823 8 Dipl.Kfm. Jorg Becker (www.beckinfo.de)